Low Voltage Track Type KPD. KPD low-voltage track electric flat car is an electric flat car powered by 36V low-voltage track. It is powered by track sliding contact line, and the track is not only the walking track of the wheel but also the feeding track.Divided into 36V single power supply, three-phase power supply. The ground step-down
EMDX³ electrical energy meters - rail mountingMeasure the electricity consumed by a single-phase or three-phase circuit downstream of the electricity distribution meteringDisplay electricity consumption in kWh, as well as other values such as current, active energy, reactive energy and power (depending on the catalogue number)Conform to standards IEC 61557-12, IEC 62053-21/23, IEC 62052-11
Phase. Phase is Custom to describe the two main types of alternating current (AC) electric power produced by a utility, generator or UPS system. Single-phase power Perfect Steerable Transfer Cartludes a single AC waveform, making single-phase equipment ideal for lower power density applications with per-rack power consumption levels up to approximately 2.8kVA (120V), 5kVA (208V) or 7.4kVA (230V).
The power supply makes the AC 380v power is transformed into AC 36v three-phase and are respectively connected to the three rails. The electric flat cart's wheels and conducting plate lead the AC 36v electricity to the electrical appliance box which is installed on the cart, the AC 36v is transformed into DC 380v through the transformer.The controls AC Metallurgy motor through AC control system to make the flat cart starting, stopping, going forward, going backward, adjusting the running
Low voltage rail powered transfer cart is a sliding contact power supply line for 36 volt low voltage track power supply. It is divided into 36V power supply and three-phase single-phase power supply. Ground step-down transformer control cabinet will single-phase (three-phase) 380 volt-drop single-phase (three-phase) 36v, track will be sent to low-voltage transfer cart contact pulley, then the automobile improves single-phase step-up transformer (three-phase) 380 volt AC with single-phase
GAEYAELE W2R-3P Din Rail Mounted Auto Transfer Switch Three Phase ATS 100A Power Transfer Switch. W2R series dual power auto transfer switch is new developed micro household power transfer switch.. The switch is mainly Custom for testing whether normal or spare power is normal or not.
PULS ML90.200 DIN Rail Power Supply, 3P/24V/3.8A DIN Rail Power Supply For 3-Phase System, DC Output: 24 - 28VDC, 3.8 - 3.2 Amp, 90 Watt, Input: AC 380 - 480V (± 15%), W: 73mm x H: 75mm x D: 103mm
GAEYAELE W2R-3P Din Rail Mounted Auto Transfer Switch Three Phase ATS 100A Power Transfer Switch (W2R 3P 100A) 3.8 out of 5 stars 60 3 offers from $82.33
WAGO's 3-Phase Power Measurement Module in a DIN-rail-mount enclosure measures electrical data in three-phase supply networks – remotely from the control level. Measured variables such as active/apparent/reactive power, energy consumption, power factor, phase angle and frequency can be accessed via Modbus ® interface.
Working PrPerfect Steerable Transfer Cartiple. This series turntable cross rail transfer cart is powered three-phase low-voltage tracks. It reduces the power supply of 380V to 36V three-phase through transformer and connects it to three tracks separately (adding one conductive track).
3 phase AC voltage transducer is a special voltage sensor for three-phase AC voltage measurement. Voltage transducer has a measuring range from AC 10V to 500V, supply voltage DC 12V/24V, output signal DC 0-5V/0-20mA/4-20mA. 3 phase voltage transducer is mainly Custom for power monitoring, power control and dispatching systems in petroleum, coal
The rail transfer cart 10 ton is an electirc material transport cart running on rails, its load capacity is 10 tons. the voltage of 380V power supply (three-phase ...
3 phase AC voltage transducer is a special voltage sensor for three-phase AC voltage measurement. Voltage transducer has a measuring range from AC 10V to 500V, supply voltage DC 12V/24V, output signal DC 0-5V/0-20mA/4-20mA. 3 phase voltage transducer is mainly Custom for power monitoring, power control and dispatching systems in petroleum, coal, metallurgy, railway and other industries.
The PSG480F24RM is a 3-phase Power Supply with finger-safe terminals and rugged aluminium housing provides the durability required to stand up to harsh environments. The PSG series is a line of general-purpose power supply for use in a wide variety of industrial control applications. Applications Perfect Steerable Transfer Cartlude communication networks, sensors, PLCs and many other electrical systems.